LT-5C loadcells are flat type loadcells that are manufactured from special alloy steel and work in the compression direction with a nickel-plated shear beam principle in order to increase their resistance to corrosion and industrial conditions.
LTE Series loadcells are lamella type loadcells. It is manufactured from special alloy steel and works in the compression direction with the nickel-plated shear beam principle in order to increase its resistance to corrosion and industrial conditions.
LTF Series loadcells are plate type load cells that are made of special alloy steel, coated with nickel to increase resistance to corrosion and industrial conditions, and working in the compression direction with shear beam principle.
LTU Series loadcells are plate type load cells manufactured from special alloy steel, coated with nickel in order to increase their resistance to corrosion and industrial conditions, and working in the compression direction with shear beam principle.
ST type loadcells are manufactured from special alloy steel for low and medium capacity weighing or force measurements, operating in compression, tensile or both compression and tensile directions with the nickel-plated shear beam principle in order to increase its resistance to corrosion and industrial conditions.
ST-2W type loadcells are manufactured from special alloy steel and coated with electrostatic paint in order to increase their resistance to corrosion and industrial conditions. They are loadcells that work in the compression direction with the shear beam principle, are resistant to excessive load or off-axis loads, and are produced for medium and high capacity weighing or force measurements.
STA loadcells are manufactured from special alloy aluminum and coated with anodizing to increase their resistance to corrosion and industrial conditions. These loadcells are produced for low-capacity weighing or force measurements, operating in compression, tensile or both compression and tensile directions with the bending beam principle.
BT type load is a special steel body loadcell that works with the bending beam principle and has a high weighing performance.
RT type load cells are manufactured from special alloy aluminum and coated with anodizing to increase their resistance to corrosion and industrial conditions. These loadcells work in compression, tensile or both compression and tensile directions with the bending beam principle.
PL type loadcells are manufactured from special alloy aluminum and coated with anodizing to increase their resistance to corrosion and industrial conditions. These load cells work in compression, tensile or both compression and tensile directions with the bending beam principle.
PS type loadcells are manufactured from special alloy aluminum and coated with anodizing in order to increase their resistance to corrosion and industrial conditions. These load cells work in compression, tensile or both compression and tensile directions with the bending beam principle.
MT type load cells are manufactured from special alloy aluminum and coated with anodizing to increase their resistance to corrosion and industrial conditions. These loadcells work in compression, tensile or both compression and tensile directions with the bending beam principle.
HT1 type loadcells are low profile, medium and high capacity, nickel plated special alloy steel body loadcells.
HT2 type loadcells are low profile, medium and high capacity, nickel plated special alloy steel body load cells.
RS1 Series Loadcells are manufactured to control and adjust tension in winding-unloading reels.
<br><br><strong><a href="https://puls.com.tr/web-tension-load-cell">Click here for our special Web Tension Load Cell introduction page.</a></strong>
RS2 Series Loadcell is manufactured to accurately control and finely adjust tension in the winding-unloading reels.
<br><br><strong><a href="https://puls.com.tr/web-tension-load-cell">Click here for our special Web Tension Load Cell introduction page.
RS3 Series Loadcell is manufactured to control and maintain precise tension in the winding-unloading reels.
<br><br><strong><a href="https://puls.com.tr/web-tension-load-cell">Click here for our special Web Tension Load Cell introduction page.</a></strong>
RS5 Series Loadcell is carefully designed to control and maintain tension in winding-unloading reels.
<br><br><strong><a href="https://puls.com.tr/web-tension-load-cell">Click here for our special Web Tension Load Cell introduction page.</a></strong>
LPF loadpin loadcells are loadcells manufactured for crane systems. They are placed as a pin on the reel in the lifting mechanism of the cranes. During the lifting or lowering process of the crane, it sends the force applied by the load to the pulley as an electrical signal to the indicator or control instrument.
Overload limiter, as you can understand from the name, it is used to protect the lifting system (crane, elevator, etc.) from overloads. It can be used to pull the cables or ropes to be pulled between two poles at the desired tension.
MKLT LoadCell Assembly Kit is produced for mounting of LT series load cells.
MKBT LoadCell Assembly Kit is produced for mounting of BT series load cells. These are developed for tank and bunker applications.
MKHT2 LoadCell Assembly Kit is produced for mounting of HT2 series load cells. These are developed for tank,bunker and silos applications.
PD-20S transmitter is an innovative product developed for filling / packaging, tank weighing, overload safety and control applications with its compact design, 100Hz sampling rate, sensitivity of 100,000, special anti-vibration and signal filters, superior signal processing.
PA-10 Load cell Transmitter is a loadcell signal converter used to amplify the signal in order to carry the loadcell signals to long distances or to integrate the signals coming from the loadcell into the control system.
PA-420 Load cell Transmitter is a loadcell signal converter used to amplify the signal in order to carry the loadcell signals to long distances or to integrate the signals coming from the loadcell into the control system.
The types of transmitters are classified based on different data transmission methods such as analog, digital, wireless, and Modbus.
The HGX-1000 weighing indicator is a perfect solution for many weighing applications that the industry needs, such as packaging, dosing, test machines, overload control systems, tank weighing and control applications, with its specially developed software and parallel hardware.
The HGX-1050 weighing indicator has become indispensable for industrial weighing and control applications with its high sampling rate (200Hz) and superior analog signal processing hardware. It offers a premium solution especially in applications such as filling / packaging that require high sensitivity (display resolution 1/100.000) and high speed.
FSM-2 Indicator is a digital weight indicator which is designed to use in all kinds of weighing processes (tank/silo weighing, scales, truck scales, weighing platforms, etc.), providing high precision with 200Hz sampling rate.
HGX-1300 panel type indicator is an innovative product developed for filling / packaging, tank weighing, overload safety and control applications with its compact design, 100Hz sampling rate, sensitivity of one in 100,000, special anti-vibration and signal filters, superior signal processing.
They are used to see the weighing results in a different place than the indicator.
J boxes are used in scales or weighing systems where more than one loadcell is used, to safely transport the loadcell feed and the signals produced by the load cells to the indicator used for indicator or control purposes.
