CHARGING GENERATOR
Smart Charger
Stock Code: 3 DCYK2 018
Smart Charger is a high voltage generator designed to feed high voltage electrodes. High tension causes the material to bond temporarily.
Piece :
1
SHARE:
GENERAL INFORMATION
The Smart Charger is a high-voltage generator designed to feed high-voltage electrodes. High-voltage allows the material used to adhere temporarily.

With its small dimensions and low weight, the generator can be used close to high voltage electrodes. These features of the product enable the product to be used as an end-of-arm tool in robot arms. High voltage electrodes connected to the generator with the removable electrode head can be easily replaced.

The product is supply and controlled by the M12 connector. High voltage control can be done directly with the M12 connector or by using an external control kit. The control kit is a separate part of the product. After connecting the generator with the control kit, the generator can be controlled remotely.

The generator is supplied with 24 V DC and produces an output voltage between 0-18 kV DC. The output voltage is adjusted by a 4-20 mA control signal. Current protection protects the product against the excessive current drawing from high voltage output. When the current drawn exceeds the current limit, the output voltage will drop automatically to protect the product. Arc protection will protect the product, against arcing that may occur at high voltage output.
ADVANTAGES AND USAGE AREAS
APPLICATION
  • In-mould labelling
  • End-of-arm static applications
  • Static Adhesion
  • ADVANTAGES
  • Easy-to-replace electrode head
  • Two-sided, bicolor indicators
  • Flexible püro cable for machines with moving parts
  • Remote voltage adjustment via 4-20 mA
  • Low weight, small dimensions
  • Remote high voltage on-off
  • Mains Voltage :
    22-27 V DC
    Remote Control :
    0V=Off 12-24V=On 0-10V DC
    High Voltage Control :
    4-20 mA
    Input-Output Connectors :
    M12, 5 pin
    High Voltage :
    0-18 kV
    Output Current :
    0.5 mA
    Class :
    Product : IP60 Socket : IP65
    Operating temperature range :
    0-55°C
    Dimensions :
    250 x 53 x 51 mm
    Weight :
    0.8 kg
    Ripple, Peak-Peak :
    %5 Output Voltage at. max. load
    Frequency :
    DC
    Rated Output :
    High Voltage Active Signal Transistor Output
    Input Power :
    15 W
    Output Power :
    9 W
    Voltage Stabilization :
    0.5% maximum output voltage and load
    İnsurance :
    Permanent non-Perishable nsurance
    Polarity :
    N=Negative
    Short Circuit Protection :
    Yes
    Approval :
    CE
    Click to Download Technical Drawing

    PDF document is being prepared. Please try again later...

    Click to Download the Brochure

    PDF document is being prepared. Please try again later...

    Smart Charger Kit - SCK02
    Smart Charger Kit - ECK01
    Mini Distributor 6 Pin
    Mini Distributor 4 Pin
    HV Connector Kit
    Mini HV Connector Kit
    M12-5 Connector

    OUR ALTERNATE PRODUCTS

    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.