CHARGING GENERATOR
Static Charging Generator 40kV
Stock Code: 3DCYK04
Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
SHARE:
GENERAL INFORMATION
Static Charging Generator is appropriate for high voltage applications and for powered bars. The unit''s output voltage and protection current value are digitally set by using front panel. The output voltage can be set between 0kV-40kV and as to current it is between 0 - 4mA. The power supply includes remote on/off and remote voltage adjustment settings and also can produce both positive and negative charges.
ADVANTAGES AND USAGE AREAS
ADVANTAGES
  • Easy to install
  • Digital output setting
  • Rotaring front panel by 180°
  • 4 x HV output

  • APPLICATIONS
  • In mold labelling (IML)
  • Bags on Roll
  • DVD Manufactoture
  • Board Laminating
  • Compensating Stackers
  • Film Bag with Gusset
  • Multi sheet Feeders
  • Fiat Bag With Gusset
  • Side Weld Bag Handles
  • Shrink Wrapping
  • Electrostatic Bonding
  • Mains Voltage :
    90 - 240V AC
    Frequency :
    50 /60Hz
    Max. Input Power :
    210 W
    Max. Input Power :
    IEC-320 Europe Type
    Fuse :
    1 AT
    Output Voltage :
    0 - 40kV
    Ripple,Peak-Peak :
    %5 Output Voltage at. max. load
    Max. Output Current :
    4uA
    Max. Output Power :
    160 W
    Polarity :
    N=Negative/P=Positive
    Short Circuit Protection :
    Short Circuit Current Adjust
    Ambient Temperature :
    0-60°C
    Voltage Stabilization :
    %1 at max output voltage and load
    Remote Control :
    0V=Off 12-24V=On 0-10V DC
    Input-Output Connectors :
    4xHV output, 1xI/O Sub-D 25
    Weight :
    7,1kg
    High Voltage Setting :
    0-10 V
    Rated Output :
    Relay Output That Reports The Fault Status of the Device, High Voltage Active Output, Grounding Load Output
    Dimensions :
    245 x 113 x 358 mm
    Approval :
    CE
    Class :
    IP20

    PDF document is being prepared. Please try again later...

    Click to Download the Brochure

    PDF document is being prepared. Please try again later...

    Charging Pinner
    Charging Pinner
    Static Charging Bar
    PULS Static Charging Bars are used in applications where the material needs to stick to one place or to each other.
    High Voltage Silicon Cable
    DC High Voltage Distributor
    The DC high voltage distributor is designed for easier connection in high voltage applications.
    Stock Code Capacity/Length/Type Product Description Quantity
    3DCYK04
    1
    GET A QUOTE

    OUR ALTERNATE PRODUCTS

    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Smart Charger is a high voltage generator designed to feed high voltage electrodes. High tension causes the material to bond temporarily.