ANTI STATIC ELIMINATOR ANTI STATIC BARS
Ion Circle Anti Static Eliminator
Stock Code:
It is specially designed by using static electricity receiver bars, it is used to remove static electricity, especially in fluid granular materials.
Piece :
1
SHARE:
GENERAL INFORMATION
"Ionization Chamber are manufactured with the cutomized design of anti-static bars, especially designed for the static elimination of flowing particle materials. In Industry raw material can mostly not be used only itself, it is generally mixed with various additives and masterbatch. If additives and materials are statically at opposite polarity, there will be not much problem. On the other hand, if charged with same polarity, this will lead various problems.As known, opposite poles repel each other, while same poles attract. This will result in inappropriate mixture leading into undesired problems such as inhomogenous mixture, unqualified product, color differences, local color deviations. In some cases, paint particles stick onto sides of the container. This prevents the paint to be appropriately mixed with the main material. While the mixture is transferred by vacuum, paint sticks on the sides of the silo. Accordingly the desired color spectrum cannot be matched. By the help of the ionization chambers developed by Puls Electronic, static ionization chamber eliminators neutralize the static charges inside the mixture of raw and paint material so that there will be no sticking on the sides of the container. As raw material and paint does not repel each other, the mixture gives perfect result. Set up of ionization chamber is easy and practical. It is generally applied at the exit of the masterbatch lines or dosing containers. It offers high performance and cost effective solution, as well as, can be quickly delivered being helpful for the industry. As well as, after sales service is available. This product has a higher version model that is including creation of air curtain."
ADVANTAGES AND USAGE AREAS
APPLICATIONS
  • Grain (Wheat, Barley) warehouses
  • Flour packaging
  • Recycling of crushing lines
  • Instant powder food
  • Wood sawdust

  • It can be used without any problems in areas such as.
    Mains Voltage :
    7.5 kV. AC.
    Ambient Humidity :
    Max. %70 RH
    Operating temperature range :
    0-80°C
    Dimensions :
    20 x 350 x 350 mm
    Approval :
    CE
    Short Circuit Protection :
    Max. Output :
    Less than 5 mA
    Type :
    3 KİT75 04 00XX
    Mains Frequency :
    50/60 Hz
    Weight :
    xxx Kg/m
    Construction :
    Alüminyum and PVC
    Emmiters :
    Stainless 304
    Cable Length :
    2.5 m HV Cable
    Mains Frequency :
    50 / 60 Hz

    PDF document is being prepared. Please try again later...

    PDF document is being prepared. Please try again later...

    OUR ALTERNATE PRODUCTS

    It is a static electricity receiver inhibitor product especially developed for use in low weight processes, sensitive paper processes, genuine silk woven fabrics, and thin materials such as cigarette papers.
    It neutralizes the static electricity charge formed on the surface with the principle of flowing to the profile through millions of sharp points formed by carbon brushes and thus transmitting it to the ground.
    Among the anti-static inhibitors, the most widely used product in the industry is static electricity receiver-static electricity anti-static bars, called anti-static bars.
    With its new generation design, embedded microprocessor-controlled power unit and an impact distance of up to 700mm, the antistatic HPR series bar has been the choice of machine manufacturers in particular. It provides an easy ionization solution in high-speed processes, in applications where air is not desired, especially in lines that require food and hygiene, and in applications where long mounting distances are required.