PRODUCTS
/
Platform Type Load Cells
/
PL-Series Single Point Load Cell

PL-Series Single Point Load Cell

PL series load cells are made of special anodized aluminium alloy that isolates it from corrosion and industrial environmental conditions. Operating with bending beam principle, PL type load cells were designed for tension or compression or for both tension and compression applications. It is highly resistant to eccentric loading. The platform sizes are 40 cm x 40 cm. The sensing element is covered with special silicone that protects it from dust and humidity.

General Applications
- Packaging and Filling Machines
- Checkweighers
- Counterscales
- Conveyor Weighings
- Market Scales

Capacity
The PL series load cells are produced in 10, 30, 50,100 kg capacities.

  • Technical Properties
  • Technical Drawing
  • Brochures
  • Related Files
  • Related Videos
: PL SERIES PLATFORM TYPE LOAD CELL
: Accuracy class C3
: Capacity /Emax. 10,,30,50,100 Kg
: Minimum dead load 0 %R.O
: Rated output 2,0 mV/V
: Maximum number of load cell interval Nmax 3000
: Vmin. Emax/4000
: Emax./Vmin 10000
: Min.dead load output return <+-0,0167
: Zero balance +-1 %R.O
: Temperature effect on zero %R.O/5°C <+-0,0070
: Temperature effect on output < 0,0055 %R.O/5°C
: Compensated temperature-10 /+40 °C
: Temperature range safe -30 /+70 °C
: Maximum safe central overload 150 %R.O
: Ultimate central overload 300 %R.O
: Excitation 5V
: İnput impedance 395±20 Ω
: Output impedance 350±3 Ω
: Insulation resistance >1000 MΩ
: Anodized aluminium alloy
: Environmental protection IP66
: Cable type 4x0,22 mm
: Cable length 3m
: PL 40x40 cm
Powered by Entranet