PRODUCTS
/
Platform Type Load Cells
/
MT-Series Single Point Load Cell

MT-Series Single Point Load Cell

MT series load cells are made of special anodized aluminium alloy that isolates it from corrosion and industrial environmental connditions. Operating with bending beam principle, MT type load cells were designed for tension or compression or for both tension and compression applications. It is highly resistant to eccentric loading. The maximum platform sizes are 15 cm x 15 cm. The sensing element is covered with silicone that protects it against dust and humidity.

General Applications
- Packaging and Filling machines
- Counter Scales
- Market Scales

Capacity
The MT series load cells are produced in 2,3 kg capacities.

  • Technical Properties
  • Technical Drawing
  • Brochures
  • Related Files
  • Related Videos
: MT SERIES SINGLE POINT LOADCELL
: Accuracy class C1
: Capacity /Emax. 2-3 Kg
: Min. dead load 0 %R.O
: Rated output 1 mV/V
: Max.number of load cell interval Nmax.3000
: V/min. Emax/5000
: Emax/Vmin 5000
: Minimum dead load output return <0,05 %R.O
: Zero balance +-1 %R.O
: Temperature effect on zero < 0,0070 %R.O/5°C
: Temperature effect on output < 0,0055 %R.O/5°C
: Compensated temperature range -10 /+40 °C
: Temperature range safe -30 /+70 °C
: Max.safe central overload 150 %R.O
: Ultimate central overload 300 %R.O
: Excitation 5V
: Input impedance 395±20 ohm
: Output impedance 350±3 ohm
: Insulation resistance>1000 M
: Anodied aluminium alloy
: Environmental protection IP55
: Cable type 4x0,22 mm
: Cable length 0,5m.
: Platform 10x10 cm
Powered by Entranet