5 PIN IML
5 PIN IML
Stock Code: 3 YA1 03 S005
It is one of our products developed for the full placement of the labels in the mold in in-mold labeling.
Piece :
1
SHARE:
GENERAL INFORMATION
It is necessary to have the tag to fit the mould while the production of In-Moulding applications is in process. Due to the high performance of the 5 PIN IML titanium needles, the tag gets glued to the mould without problems.
ADVANTAGES AND USAGE AREAS
ADVANTAGES
  • Since liquid resin materials do not require casting, drying, or shaping after drying, they can be assembled in a very short time and will not cause any disruption to your production.
  • Unlike sponge, there is no need to put a conductive sheet between the Dami and the sponge, therefore it reduces your cost.
  • There will be no product losses due to punctures and hardening of the sponge. Since it operates at low voltages, there will be no excessively high static electricity at the injection outlet, it will absorb less dust and particles in the environment, which means the material will be less contaminated during storage.
  • Main Voltage :
    Max.30 kV
    Dimensions :
    9 x 11mm
    Operating Distance :
    50 mm
    Material :
    Type :
    3 YA1 03 S005 (IML 5 PIN )
    Mounting :
    With M4 screw
    Emmiters :
    Titanium al GR. 8
    Weight :
    2 gr

    PDF document is being prepared. Please try again later...

    PDF document is being prepared. Please try again later...

    OUR ALTERNATE PRODUCTS