APPLICATIONS
/
Antistatic Plastic Applications
/
Vacuum Forming Machine

Vacuum Forming Machine

Vacuum Forming Machine

As soon as the rolled plate in the vacuum forming machine begins to unfold, the static charge begins to be charged. When the high temperature in the heating pan and the pressure is added in the forming line, will result in very high static loads on the shaped product and problems of dusting that can not be removed. This is because the static charge caused by the dissolution will cause small particles to adhere to the sheet and, if not removed before shaping, the powder will be kept within the shaped product.
Puls Air static anti-static bars will be applied before the heater pan to neutralize the existing static electricity and prevent dusting. The air applied to the surface will also help to remove dust particles that can not be blocked by the surface.

 

Powered by Entranet